# Sienci Labs Monthly Production Update - March 2024

**URL:** <https://forum.sienci.com/t/sienci-labs-monthly-production-update-march-2024/11635>\
**Category:** 📰 News/Update\
**Created:** [March 18, 2024, 6:22pm UTC](https://forum.sienci.com/t/sienci-labs-monthly-production-update-march-2024/11635 "2024-03-18T18:22:08Z")\
**Posts on this page:** 8\
**Page:** 1

<div class="post-metadata">

**Author:** ![mollysaynavong](https://forum.sienci.com/user_avatar/forum.sienci.com/mollysaynavong/32/5054_2.png) [@mollysaynavong](https://forum.sienci.com/u/mollysaynavong)\
**Post date:** [March 18, 2024, 6:22pm UTC](https://forum.sienci.com/t/sienci-labs-monthly-production-update-march-2024/11635/1 "2024-03-18T18:22:08Z")

</div>

Hi folks! Check out Andy’s March 2024 production updates video.

To learn more, watch the full video and visit our blog. Make sure to subscribe to our YouTube channel for more update videos.

Video:

[![](https://img.youtube.com/vi/aFmWzLS1fpc/maxresdefault.jpg "Sienci Labs Monthly Production Update - March 2024") ](https://www.youtube.com/watch?v=aFmWzLS1fpc)

Blog:

> **[March 2024 Production Updates | Sienci Labs](https://sienci.com/2024/03/04/march-2024-production-updates/?utm_source=forum&utm_medium=blog&utm_campaign=production-update&utm_content=static-post)**
>
> Hey guys, it’s Andy again with March 2024 production updates. I am currently writing this in China, where I am taking a bit of a "work-acation" but also to visit some suppliers and manufacturers that we work with. This also means we'll film the...

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [March 18, 2024, 6:57pm UTC](https://forum.sienci.com/t/sienci-labs-monthly-production-update-march-2024/11635/2 "2024-03-18T18:57:05Z")

</div>

@andy WRT the router, can you provide info on the collets/shank sizes that it will accept?

---

<div class="post-metadata">

**Author:** ![StephenCampbell](https://forum.sienci.com/user_avatar/forum.sienci.com/stephencampbell/32/6018_2.png) [@StephenCampbell](https://forum.sienci.com/u/StephenCampbell)\
**Post date:** [March 20, 2024, 1:04pm UTC](https://forum.sienci.com/t/sienci-labs-monthly-production-update-march-2024/11635/3 "2024-03-20T13:04:24Z")

</div>

Hey @gwilki,

Chatting with Daniel, he states: _For the Altmill (1.5kw ‘spindle’) It’s going to use ER16 type collet and we’re planning to include an 1/8, 1/4, and 3/8” collet_.

Hope that helps!]

Cheers,  
Stephen

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [March 20, 2024, 1:14pm UTC](https://forum.sienci.com/t/sienci-labs-monthly-production-update-march-2024/11635/4 "2024-03-20T13:14:56Z")

</div>

@StephenCampbell Tks, Stephen. However, I was referring to the Sienci router that you are developing.

---

<div class="post-metadata">

**Author:** ![StephenCampbell](https://forum.sienci.com/user_avatar/forum.sienci.com/stephencampbell/32/6018_2.png) [@StephenCampbell](https://forum.sienci.com/u/StephenCampbell)\
**Post date:** [March 20, 2024, 1:28pm UTC](https://forum.sienci.com/t/sienci-labs-monthly-production-update-march-2024/11635/5 "2024-03-20T13:28:17Z")

</div>

Grant, sounds like we are planning to use an ER16 size collet for the new spindle as well.

Cheers,  
Stephen

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [March 20, 2024, 1:57pm UTC](https://forum.sienci.com/t/sienci-labs-monthly-production-update-march-2024/11635/6 "2024-03-20T13:57:11Z")

</div>

@StephenCampbell That’s the right answer. 😀

Tks much, Stephen.

---

<div class="post-metadata">

**Author:** ![CrookedWoodTex](https://forum.sienci.com/user_avatar/forum.sienci.com/crookedwoodtex/32/10446_2.png) [@CrookedWoodTex](https://forum.sienci.com/u/CrookedWoodTex)\
**Post date:** [March 20, 2024, 9:28pm UTC](https://forum.sienci.com/t/sienci-labs-monthly-production-update-march-2024/11635/7 "2024-03-20T21:28:07Z")

</div>

> [@StephenCampbell](#):
>
> _For the Altmill (1.5kw ‘spindle’) It’s going to use ER16 type collet and we’re planning to include an 1/8, 1/4, and 3/8” collet_.

That beast looks like it could handle ER20 tools. Is it the spindle that limits it to ER16?

---

<div class="post-metadata">

**Author:** ![StephenCampbell](https://forum.sienci.com/user_avatar/forum.sienci.com/stephencampbell/32/6018_2.png) [@StephenCampbell](https://forum.sienci.com/u/StephenCampbell)\
**Post date:** [March 22, 2024, 1:12pm UTC](https://forum.sienci.com/t/sienci-labs-monthly-production-update-march-2024/11635/8 "2024-03-22T13:12:48Z")

</div>

Yep, its just a bit easier to find a spindle with ER16 for the specs we’re looking for. Daniel is actually picking up a 5kw spindle on the weekend that’s ER32 so we’ll see how that works out 🙂
