# Spring/Easter Door Hanger

**URL:** <https://forum.sienci.com/t/spring-easter-door-hanger/5284>\
**Category:** 🪑 Projects\
**Created:** [February 28, 2022, 7:58pm UTC](https://forum.sienci.com/t/spring-easter-door-hanger/5284 "2022-02-28T19:58:32Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![wingwalker77](https://forum.sienci.com/user_avatar/forum.sienci.com/wingwalker77/32/847_2.png) [@wingwalker77](https://forum.sienci.com/u/wingwalker77)\
**Post date:** [February 28, 2022, 7:58pm UTC](https://forum.sienci.com/t/spring-easter-door-hanger/5284/1 "2022-02-28T19:58:32Z")

</div>

Made a monogrammed door hanger for my girlfriends office.

 ![IMG_8007](https://forum.sienci.com/uploads/default/original/2X/e/effe39ca6bf946fea437c971620cadba584832e8.jpeg)

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [February 28, 2022, 8:21pm UTC](https://forum.sienci.com/t/spring-easter-door-hanger/5284/2 "2022-02-28T20:21:44Z")

</div>

@wingwalker77 Welcome to the group, Darian. You make a great first impression.

If you would, please tell us more about this project - software used, material, bits used, feeds and speeds, finishing techniques, etc. I’m not asking for much, am I? 😀

---

<div class="post-metadata">

**Author:** ![wingwalker77](https://forum.sienci.com/user_avatar/forum.sienci.com/wingwalker77/32/847_2.png) [@wingwalker77](https://forum.sienci.com/u/wingwalker77)\
**Post date:** [February 28, 2022, 9:20pm UTC](https://forum.sienci.com/t/spring-easter-door-hanger/5284/3 "2022-02-28T21:20:14Z")

</div>

Approximately 18 inches tall. Purchased the base file from Etsy and edited in Carbide Create, controlled the machine with Gsender. 1/4 inch birch ply cut with a 1/8 downcut bit. DPP 0.080, Feed 30 inches per minute, Plunge rate 10, and router speed approximately 17,000 rpm (setting 3 on the Makita). Finished with acrylic paint and glued the layers together with TiteBond. It’ll be displayed indoor, so no protectant finish was applied.

---

<div class="post-metadata">

**Author:** ![Jake](https://forum.sienci.com/user_avatar/forum.sienci.com/jake/32/2491_2.png) [@Jake](https://forum.sienci.com/u/Jake)\
**Post date:** [March 1, 2022, 1:51am UTC](https://forum.sienci.com/t/spring-easter-door-hanger/5284/4 "2022-03-01T01:51:39Z")

</div>

@wingwalker77 Welcome sir! I like your bunny rabbit. Great job! Keep posting projects that you make with your LongMill.

Be safe!  
Jake

---

<div class="post-metadata">

**Author:** ![RustyR](https://forum.sienci.com/user_avatar/forum.sienci.com/rustyr/32/2989_2.png) [@RustyR](https://forum.sienci.com/u/RustyR)\
**Post date:** [March 1, 2022, 2:03pm UTC](https://forum.sienci.com/t/spring-easter-door-hanger/5284/5 "2022-03-01T14:03:48Z")

</div>

Super cute. Great job.  
Thanks for sharing your cutter and toolpath speeds and feeds.