# Start at Line gsender

**URL:** <https://forum.sienci.com/t/start-at-line-gsender/5008>\
**Category:** 🐛 Bug\
**Created:** [January 22, 2022, 5:53pm UTC](https://forum.sienci.com/t/start-at-line-gsender/5008 "2022-01-22T17:53:49Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Arborister](https://forum.sienci.com/letter_avatar_proxy/v4/letter/a/8797f3/32.png) [@Arborister](https://forum.sienci.com/u/Arborister)\
**Post date:** [January 22, 2022, 5:53pm UTC](https://forum.sienci.com/t/start-at-line-gsender/5008/1 "2022-01-22T17:53:49Z")

</div>

Hey all, i’m fairly new to CNC’s and know very little about coding. The issue i’m having is that when i pause or stop a project to make adjustments ( to depth of cut for example) and want to start again from the line i stopped at, it seems the machine doesn’t read the previously set feed rate and cuts as fast as it possibly can. I’m sure this is a simple fix, i just don’t know enough about the machine yet and how to adjust it. I appreciate any help. Thanks in advance.

---

<div class="post-metadata">

**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\
**Post date:** [March 4, 2022, 4:37pm UTC](https://forum.sienci.com/t/start-at-line-gsender/5008/3 "2022-03-04T16:37:50Z")

</div>

We’ve made some changes that should address this in an upcoming release - feed and speeds should be sent correctly on start from line in all situations.

Cheers,  
Kevin

---

<div class="post-metadata">

**Author:** ![chrismakesstuff](https://forum.sienci.com/user_avatar/forum.sienci.com/chrismakesstuff/32/10759_2.png) [@chrismakesstuff](https://forum.sienci.com/u/chrismakesstuff)\
**Post date:** [March 25, 2022, 2:43pm UTC](https://forum.sienci.com/t/start-at-line-gsender/5008/4 "2022-03-25T14:43:07Z")

</div>