# Starting up issue

**URL:** <https://forum.sienci.com/t/starting-up-issue/3768>\
**Category:** ❓ Something's Up\
**Created:** [September 27, 2021, 4:11pm UTC](https://forum.sienci.com/t/starting-up-issue/3768 "2021-09-27T16:11:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Magnus\_Longmill](https://forum.sienci.com/letter_avatar_proxy/v4/letter/m/8baadc/32.png) [@Magnus\_Longmill](https://forum.sienci.com/u/Magnus_Longmill)\
**Post date:** [September 27, 2021, 4:11pm UTC](https://forum.sienci.com/t/starting-up-issue/3768/1 "2021-09-27T16:11:12Z")

</div>

I set my mill up for first time. Make simple program with text in Carbide Create for test. Outline is working , but not able to run program. Nothing happens. Thanks for your support.

---

<div class="post-metadata">

**Author:** ![DrewBSC](https://forum.sienci.com/user_avatar/forum.sienci.com/drewbsc/32/2195_2.png) [@DrewBSC](https://forum.sienci.com/u/DrewBSC)\
**Post date:** [September 27, 2021, 10:51pm UTC](https://forum.sienci.com/t/starting-up-issue/3768/2 "2021-09-27T22:51:26Z")

</div>

Hey Magnus,

Did you change the post processing to GRBL. This gave me an issue when I first tried to cut using CC.

Edit\> Select Post Processor\> GRBL

Drew
