# Stepper Wire holders

**URL:** <https://forum.sienci.com/t/stepper-wire-holders/26404>\
**Category:** 📄 General\
**Created:** [May 14, 2026, 12:49am UTC](https://forum.sienci.com/t/stepper-wire-holders/26404 "2026-05-14T00:49:13Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![gremlin](https://forum.sienci.com/user_avatar/forum.sienci.com/gremlin/32/13047_2.png) [@gremlin](https://forum.sienci.com/u/gremlin)\
**Post date:** [May 14, 2026, 5:15am UTC](https://forum.sienci.com/t/stepper-wire-holders/26404/2 "2026-05-14T05:15:38Z")

</div>

Look in this thread if you’re talking about the wire holder that twists in look further down the thread not the starting message

> [@Sharing - Twist Track STL](https://forum.sienci.com/t/sharing-twist-track-stl/25511):
>
> Inspired by the twist-in style cable organizers by Sienci, this will twist into the Sienci T-Tracks. There are 3mm slots on the top. I use it to hold vertical acrylic sheets which function as chip guards when cutting aluminum to try and keep the mess down. You’ll need supports if you want to print this in the strongest orientation, support interface material is great stuff. [TwistTrack.stl](https://forum.sienci.com/uploads/short-url/e94dOJg5qIN6NLpJGDcPw0WTbue.stl) (66.7 KB)

---

_[View the full topic](https://forum.sienci.com/t/stepper-wire-holders/26404)._