# Table leg length

**URL:** <https://forum.sienci.com/t/table-leg-length/17686>\
**Category:** 🧰 CNC Setup\
**Created:** [June 14, 2025, 9:01pm UTC](https://forum.sienci.com/t/table-leg-length/17686 "2025-06-14T21:01:50Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![d46ramsey](https://forum.sienci.com/letter_avatar_proxy/v4/letter/d/2bfe46/32.png) [@d46ramsey](https://forum.sienci.com/u/d46ramsey)\
**Post date:** [June 14, 2025, 9:01pm UTC](https://forum.sienci.com/t/table-leg-length/17686/1 "2025-06-14T21:01:50Z")

</div>

I would like to suggest you offer 2 leg lengths for the table. Maybe one that is 5 inches shorter than the standard,  
Reason:

1. For those who want to sit
2. When the table needs to be lower for other tools to clear. For example, when the cnc is along a wall with a miter saw and the clearance over the table is necessary for long material on the miter.

---

<div class="post-metadata">

**Author:** ![d46ramsey](https://forum.sienci.com/letter_avatar_proxy/v4/letter/d/2bfe46/32.png) [@d46ramsey](https://forum.sienci.com/u/d46ramsey)\
**Post date:** [June 16, 2025, 2:47pm UTC](https://forum.sienci.com/t/table-leg-length/17686/2 "2025-06-16T14:47:04Z")

</div>

An even better idea:  
Make the legs adjustable. More flexibility, more universal appeal, and more competitive advantage (?).  
I just lowered my legs 5 inches and I think they are perfect for me but I have yet to even run my machine. The table had to be lower than my miter saw for long board clearance.

Suggested implementation: Just provide a two piece leg with a vertical hole pattern that allows vertical adjustment of say 6 inches and fastened together with screws. Provides a single inventory item and very little cost increase for a lot of benefit.