# Tool Length Sensor Vcarve Pro Post Processor

**URL:** <https://forum.sienci.com/t/tool-length-sensor-vcarve-pro-post-processor/26640>\
**Category:** 📄 General\
**Created:** [June 28, 2026, 12:36pm UTC](https://forum.sienci.com/t/tool-length-sensor-vcarve-pro-post-processor/26640 "2026-06-28T12:36:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![BCAM](https://forum.sienci.com/letter_avatar_proxy/v4/letter/b/e47c2d/32.png) [@BCAM](https://forum.sienci.com/u/BCAM)\
**Post date:** [June 28, 2026, 12:36pm UTC](https://forum.sienci.com/t/tool-length-sensor-vcarve-pro-post-processor/26640/1 "2026-06-28T12:36:55Z")

</div>

I just received the TLS. I am having trouble with the post processor not supporting tool changes.

Is there a post processor in Vcarve Pro that supports tool changes?

---

<div class="post-metadata">

**Author:** ![Altmillal1114](https://forum.sienci.com/letter_avatar_proxy/v4/letter/a/f6c823/32.png) [@Altmillal1114](https://forum.sienci.com/u/Altmillal1114)\
**Post date:** [June 29, 2026, 10:42am UTC](https://forum.sienci.com/t/tool-length-sensor-vcarve-pro-post-processor/26640/2 "2026-06-29T10:42:34Z")

</div>

try here: [Tool Length Sensor - Add-ons](https://resources.sienci.com/view/addons-tls/#vectric)