# Tooltips in surfacing screen

**URL:** <https://forum.sienci.com/t/tooltips-in-surfacing-screen/5824>\
**Category:** 🐛 Bug\
**Created:** [May 11, 2022, 10:45pm UTC](https://forum.sienci.com/t/tooltips-in-surfacing-screen/5824 "2022-05-11T22:45:47Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Ryecon](https://forum.sienci.com/user_avatar/forum.sienci.com/ryecon/32/4548_2.png) [@Ryecon](https://forum.sienci.com/u/Ryecon)\
**Post date:** [May 11, 2022, 10:45pm UTC](https://forum.sienci.com/t/tooltips-in-surfacing-screen/5824/1 "2022-05-11T22:45:47Z")

</div>

In the Surfacing Tool popup the tooltips for ‘Router bit diameter’, ‘Layer depth’ , ‘Max depth’ give you the default value but another tooltip appears below saying “Please enter a valid value…”

I think this is a typo or bug.

---

<div class="post-metadata">

**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\
**Post date:** [May 19, 2022, 1:31pm UTC](https://forum.sienci.com/t/tooltips-in-surfacing-screen/5824/2 "2022-05-19T13:31:46Z")

</div>



---

<div class="post-metadata">

**Author:** ![chrismakesstuff](https://forum.sienci.com/user_avatar/forum.sienci.com/chrismakesstuff/32/10759_2.png) [@chrismakesstuff](https://forum.sienci.com/u/chrismakesstuff)\
**Post date:** [November 4, 2024, 4:30pm UTC](https://forum.sienci.com/t/tooltips-in-surfacing-screen/5824/3 "2024-11-04T16:30:23Z")

</div>

Good catch @Ryecon! Thanks