# Touch plate setup

**URL:** <https://forum.sienci.com/t/touch-plate-setup/26522>\
**Category:** 📄 General\
**Created:** [June 4, 2026, 6:21pm UTC](https://forum.sienci.com/t/touch-plate-setup/26522 "2026-06-04T18:21:52Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![PABwood](https://forum.sienci.com/letter_avatar_proxy/v4/letter/p/54ee81/32.png) [@PABwood](https://forum.sienci.com/u/PABwood)\
**Post date:** [June 4, 2026, 6:21pm UTC](https://forum.sienci.com/t/touch-plate-setup/26522/1 "2026-06-04T18:21:53Z")

</div>

I have an open builds lead 1010 trying to set up G sender with an existing open builds touch plate. Can someone help/guide me through the setup process in G sender for an open build XYZ touch plate? Any help would be appreciated and thank you.

---

<div class="post-metadata">

**Author:** ![Spamming\_Eddie](https://forum.sienci.com/user_avatar/forum.sienci.com/spamming_eddie/32/7296_2.png) [@Spamming\_Eddie](https://forum.sienci.com/u/Spamming_Eddie)\
**Post date:** [June 4, 2026, 6:49pm UTC](https://forum.sienci.com/t/touch-plate-setup/26522/2 "2026-06-04T18:49:29Z")

</div>

Hello Paul,

Welcome to the forum. Can this section of the gsender manual help you out?

> **[Using gSender - gSender Docs](https://resources.sienci.com/view/gs-using-gsender/#probing)**
>
> When you double click the gSender icon to open up the program, it can take several extra seconds to load if you have Microsoft real time virus protection on your computer. This scan delay should only happen the first time you turn on your computer. |...

---

<div class="post-metadata">

**Author:** ![PABwood](https://forum.sienci.com/letter_avatar_proxy/v4/letter/p/54ee81/32.png) [@PABwood](https://forum.sienci.com/u/PABwood)\
**Post date:** [June 6, 2026, 5:17pm UTC](https://forum.sienci.com/t/touch-plate-setup/26522/3 "2026-06-06T17:17:02Z")

</div>

thank you, . I will check the link out and see if that will help.