# Ugs platform issue

**URL:** <https://forum.sienci.com/t/ugs-platform-issue/974>\
**Category:** UGS\
**Created:** [May 28, 2020, 2:38am UTC](https://forum.sienci.com/t/ugs-platform-issue/974 "2020-05-28T02:38:58Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![bubalarry](https://forum.sienci.com/letter_avatar_proxy/v4/letter/b/4bbf92/32.png) [@bubalarry](https://forum.sienci.com/u/bubalarry)\
**Post date:** [May 28, 2020, 2:38am UTC](https://forum.sienci.com/t/ugs-platform-issue/974/1 "2020-05-28T02:38:58Z")

</div>

hi  
I have noticed shapes on the main screen of the ugs platform.

 ![ugs](https://forum.sienci.com/uploads/default/original/1X/4837f7e74de5ddb41fb4c42d6d1df76f59fc4946.jpeg)  
I have deleted the program then reinstalled it and got the same image as seen in the enclosed picture. The program has been used previously without the shapes appearing,  
Any thoughts?  
thanks  
Larry

---

<div class="post-metadata">

**Author:** ![Rusty\_golfer](https://forum.sienci.com/user_avatar/forum.sienci.com/rusty_golfer/32/675_2.png) [@Rusty\_golfer](https://forum.sienci.com/u/Rusty_golfer)\
**Post date:** [May 29, 2020, 4:49pm UTC](https://forum.sienci.com/t/ugs-platform-issue/974/2 "2020-05-29T16:49:14Z")

</div>

Larry, did you try clearing your cache directory. It’s location can be found listed in the “About/Help” window?  
Russ

---

<div class="post-metadata">

**Author:** ![LarryM](https://forum.sienci.com/letter_avatar_proxy/v4/letter/l/0ea827/32.png) [@LarryM](https://forum.sienci.com/u/LarryM)\
**Post date:** [May 31, 2020, 9:48pm UTC](https://forum.sienci.com/t/ugs-platform-issue/974/3 "2020-05-31T21:48:25Z")

</div>

I looks like the dowel maker tab is open. If you close it they should go away.