# Vacuum hose support

**URL:** <https://forum.sienci.com/t/vacuum-hose-support/2380>\
**Category:** 💨 Dust\
**Created:** [January 27, 2021, 7:57pm UTC](https://forum.sienci.com/t/vacuum-hose-support/2380 "2021-01-27T19:57:00Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Bill](https://forum.sienci.com/user_avatar/forum.sienci.com/bill/32/6026_2.png) [@Bill](https://forum.sienci.com/u/Bill)\
**Post date:** [January 27, 2021, 7:57pm UTC](https://forum.sienci.com/t/vacuum-hose-support/2380/1 "2021-01-27T19:57:00Z")

</div>

Made this simple support for the vacuum hose, scrap 1/2" plywood for the bracket. Cut a plug to fit inside of 3/4" PVC, jb weld in place, drilled it for rounded garage hook. 2 1/2" screws hold bracket to ceiling supports, simple hose support, sprayed it black, done deal. You can see the ground wire within the vacuum hose. Also I can fold it up towards the ceiling to get it out of the way when not needed.

 ![20210127_123549 (1024 x 768)](https://forum.sienci.com/uploads/default/original/2X/8/8743454170a5e30ee38d019fbcd3955f61818762.jpeg)