# Vcarve pro generating redundant M6’s that confuse Gsender TLS

**URL:** <https://forum.sienci.com/t/vcarve-pro-generating-redundant-m6-s-that-confuse-gsender-tls/26681>\
**Category:** Vectric\
**Created:** [July 6, 2026, 12:36am UTC](https://forum.sienci.com/t/vcarve-pro-generating-redundant-m6-s-that-confuse-gsender-tls/26681 "2026-07-06T00:36:03Z")\
**Posts on this page:** 1\
**Showing post:** 3

<div class="post-metadata">

**Author:** ![kellyz](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/9fc29f/32.png) [@kellyz](https://forum.sienci.com/u/kellyz)\
**Post date:** [July 7, 2026, 12:46pm UTC](https://forum.sienci.com/t/vcarve-pro-generating-redundant-m6-s-that-confuse-gsender-tls/26681/3 "2026-07-07T12:46:13Z")

</div>

Hey yes this was discussed here: [Tool Length Sensor Availability - #9 by Davey](https://forum.sienci.com/t/tool-length-sensor-availability/26585/9) we have an updated post processor that should avoid that bug.

---

_[View the full topic](https://forum.sienci.com/t/vcarve-pro-generating-redundant-m6-s-that-confuse-gsender-tls/26681)._