# Viewing Window Brush Replacement for Magnetic Shoe

**URL:** <https://forum.sienci.com/t/viewing-window-brush-replacement-for-magnetic-shoe/1932>\
**Category:** 💨 Dust\
**Created:** [November 26, 2020, 8:46pm UTC](https://forum.sienci.com/t/viewing-window-brush-replacement-for-magnetic-shoe/1932 "2020-11-26T20:46:45Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![flxstr](https://forum.sienci.com/user_avatar/forum.sienci.com/flxstr/32/594_2.png) [@flxstr](https://forum.sienci.com/u/flxstr)\
**Post date:** [November 26, 2020, 8:46pm UTC](https://forum.sienci.com/t/viewing-window-brush-replacement-for-magnetic-shoe/1932/1 "2020-11-26T20:46:45Z")

</div>

As I have a vertically mounted Longmill, I find the new “viewing window” of no use - as the angle doesn’t actually allow viewing of the job. All was fine, until the window broke today during a job, and I discovered to my dismay that it’s a “necessary item” to keep all the MDF from simply falling out.

Has anyone made a “window hack” with replacement brushes for this magnetic dust shoe? This shoe is actually _amazing_ when viewed from above, utilizing a camera birds eye view. I can spot any problems with a job very quickly.

 ![image](https://forum.sienci.com/uploads/default/original/2X/e/e210ce5fe6fe0004b0001a0d31ac2c9a1bb3db1c.jpeg)

---

<div class="post-metadata">

**Author:** ![jaychest](https://forum.sienci.com/letter_avatar_proxy/v4/letter/j/858c86/32.png) [@jaychest](https://forum.sienci.com/u/jaychest)\
**Post date:** [December 2, 2020, 1:52am UTC](https://forum.sienci.com/t/viewing-window-brush-replacement-for-magnetic-shoe/1932/2 "2020-12-02T01:52:25Z")

</div>

When mine broke I covered the gap with duct tape. 🙂
