# Vortex question code 19

**URL:** <https://forum.sienci.com/t/vortex-question-code-19/27650>\
**Category:** 🌀 Rotary Axis\
**Created:** [November 12, 2026, 3:46am UTC](https://forum.sienci.com/t/vortex-question-code-19/27650 "2026-11-12T03:46:24Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![bmor02](https://forum.sienci.com/letter_avatar_proxy/v4/letter/b/b38774/32.png) [@bmor02](https://forum.sienci.com/u/bmor02)\
**Post date:** [November 12, 2026, 3:46am UTC](https://forum.sienci.com/t/vortex-question-code-19/27650/1 "2026-11-12T03:46:24Z")

</div>

Only using the vortex, I’m constantly getting code 19, last g sender, and running the latest firmware SLB EXT?

---

<div class="post-metadata">

**Author:** ![gwilki](https://forum.sienci.com/user_avatar/forum.sienci.com/gwilki/32/366_2.png) [@gwilki](https://forum.sienci.com/u/gwilki)\
**Post date:** [November 12, 2026, 12:01pm UTC](https://forum.sienci.com/t/vortex-question-code-19/27650/2 "2026-11-12T12:01:06Z")

</div>

@bmor02 What is throwing the code? I don’t see an error code 19 in the list of error codes? Is this an error thrown by gSender?

---

<div class="post-metadata">

**Author:** ![KGN](https://forum.sienci.com/letter_avatar_proxy/v4/letter/k/c77e96/32.png) [@KGN](https://forum.sienci.com/u/KGN)\
**Post date:** [November 12, 2026, 1:48pm UTC](https://forum.sienci.com/t/vortex-question-code-19/27650/3 "2026-11-12T13:48:49Z")

</div>

Alarm 19 or error 19?

Error 19 does not make much sense in this context, in that it’s an error related to eeprom (non-positive value where a positive value is expecteD)

Alarm 19 is spindle Modbus communications.

> **[Alarm 14 / Alarm 19](https://sienci.zendesk.com/hc/en-us/articles/34779231810964-Alarm-14-Alarm-19)**
>
> This troubleshooting guide is for both the AltMill and LongMill using either the SLB or the SLB-EXT. Alarm 14 will appear on earlier firmware software.  If you have updated your firmware, have an A...

---

<div class="post-metadata">

**Author:** ![bmor02](https://forum.sienci.com/letter_avatar_proxy/v4/letter/b/b38774/32.png) [@bmor02](https://forum.sienci.com/u/bmor02)\
**Post date:** [November 12, 2026, 2:50pm UTC](https://forum.sienci.com/t/vortex-question-code-19/27650/4 "2026-11-12T14:50:47Z")

</div>

I can use the machine all day cnc normal I jump to vortex it will cut for a few minutes and stop with code 19 I check all my connections and the main thing is not happening with normal cnc jobs

---

<div class="post-metadata">

**Author:** ![bmor02](https://forum.sienci.com/letter_avatar_proxy/v4/letter/b/b38774/32.png) [@bmor02](https://forum.sienci.com/u/bmor02)\
**Post date:** [November 12, 2026, 2:52pm UTC](https://forum.sienci.com/t/vortex-question-code-19/27650/5 "2026-11-12T14:52:18Z")

</div>

I just purchased the controller from you guys I was told that the firmware is updated before you guys send it to me

---

<div class="post-metadata">

**Author:** ![bmor02](https://forum.sienci.com/letter_avatar_proxy/v4/letter/b/b38774/32.png) [@bmor02](https://forum.sienci.com/u/bmor02)\
**Post date:** [November 12, 2026, 2:58pm UTC](https://forum.sienci.com/t/vortex-question-code-19/27650/6 "2026-11-12T14:58:29Z")

</div>

Does is possible to remove the code from triggering in gsender or the firmware?

---

<div class="post-metadata">

**Author:** ![Spamming\_Eddie](https://forum.sienci.com/user_avatar/forum.sienci.com/spamming_eddie/32/7296_2.png) [@Spamming\_Eddie](https://forum.sienci.com/u/Spamming_Eddie)\
**Post date:** [November 12, 2026, 5:20pm UTC](https://forum.sienci.com/t/vortex-question-code-19/27650/7 "2026-11-12T17:20:40Z")

</div>

Hey bmor,

Have you installed the rotary using the manual concerning the closed loop rotary?

> **[Electronics – Closed Loop Motor - Vortex](https://resources.sienci.com/view/vx-closed-loop-motor/)**
>
> Follow these instructions if you’re assembling a Vortex rotary axis kit which utilizes a closed loop motor with two motor cable connections. You can refer to the video below for a general overview of the setup process. Scroll down for detailed, step...

---

<div class="post-metadata">

**Author:** ![bmor02](https://forum.sienci.com/letter_avatar_proxy/v4/letter/b/b38774/32.png) [@bmor02](https://forum.sienci.com/u/bmor02)\
**Post date:** [November 12, 2026, 5:51pm UTC](https://forum.sienci.com/t/vortex-question-code-19/27650/8 "2026-11-12T17:51:19Z")

</div>

Thanks for the input. I don’t believe my issue is with the closed-loop motor

---

<div class="post-metadata">

**Author:** ![Spamming\_Eddie](https://forum.sienci.com/user_avatar/forum.sienci.com/spamming_eddie/32/7296_2.png) [@Spamming\_Eddie](https://forum.sienci.com/u/Spamming_Eddie)\
**Post date:** [November 12, 2026, 6:03pm UTC](https://forum.sienci.com/t/vortex-question-code-19/27650/9 "2026-11-12T18:03:25Z")

</div>

I believe that answer to be no.

Okay succes with your enquiry. I hope you can get it resolved.
