# We’re Going to Vectric’s 2024 User Group Meeting

**URL:** <https://forum.sienci.com/t/we-re-going-to-vectric-s-2024-user-group-meeting/13902>\
**Category:** 📰 News/Update\
**Created:** [September 16, 2024, 2:58pm UTC](https://forum.sienci.com/t/we-re-going-to-vectric-s-2024-user-group-meeting/13902 "2024-09-16T14:58:37Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![mollysaynavong](https://forum.sienci.com/user_avatar/forum.sienci.com/mollysaynavong/32/5054_2.png) [@mollysaynavong](https://forum.sienci.com/u/mollysaynavong)\
**Post date:** [September 16, 2024, 2:58pm UTC](https://forum.sienci.com/t/we-re-going-to-vectric-s-2024-user-group-meeting/13902/1 "2024-09-16T14:58:37Z")

</div>

![Artboard 1](https://forum.sienci.com/uploads/default/original/2X/7/7574946505af9e1286393f0df4d59a73efdecc69.png)

Hi all, we’re off to Austin, TX for Vectric’s 2024 User Group Meeting at the Embassy Suites Round Rock on **October 11-12**! Keep an eye out for the AltMill, Vortex, and a special presentation by Scott as a guest speaker. If you’re attending, be sure to swing by and say hello!

For more information, check out Vectric’s event page:

> **[User Group Meeting 2024〡Vectric](https://www.vectric.com/vectric-community/news-and-events/events/UserGroupMeeting2024)**
>
> Vectric CNC software is designed to make cutting parts on a CNC an enjoyable and productive experience, with the combination of power and simplicity.
