# What are your plans for a table?

**URL:** <https://forum.sienci.com/t/what-are-your-plans-for-a-table/95>\
**Category:** 🧰 CNC Setup\
**Created:** [September 21, 2019, 8:09pm UTC](https://forum.sienci.com/t/what-are-your-plans-for-a-table/95 "2019-09-21T20:09:50Z")\
**Posts on this page:** 1\
**Showing post:** 1

<div class="post-metadata">

**Author:** ![David](https://forum.sienci.com/letter_avatar_proxy/v4/letter/d/aeb1de/32.png) [@David](https://forum.sienci.com/u/David)\
**Post date:** [September 21, 2019, 8:09pm UTC](https://forum.sienci.com/t/what-are-your-plans-for-a-table/95/1 "2019-09-21T20:09:51Z")

</div>

Hi, guys. I’m bound and determined to get some discussion going here, so here’s another topic that’s been weighing on my mind.

What do you intend to mount your new LongMill to?

Like most of us, I assume, I have a small two car garage that I like to park my car in, so space is at a premium.

Greg posted [this video](https://www.youtube.com/playlist?list=PLiav122Uf7xVA2wKewO5VZGwxfPXgcwrp&fbclid=IwAR24_PteqjwkM0eSBORKpLu0xy5nVP2dXV8bXu90A_71YrPMB7hsM_FhFmw) on facebook the other day, and I just about talked myself into building this myself.

The issue is, when I actually started looking into where I would put it in the garage, I realized that its huge. Even stowed with the table top vertical, it’s ~86" by ~30". And then you can’t get into any of the side drawers unless the thing has open space next to it also.

My other idea is to just make a 44"x50" table with a torsion box top, and then build my dust collection system into the back half of it, and put drawers in the front half.

I’m sure you guys have given this some thought too. So what ideas are out there?

---

_[View the full topic](https://forum.sienci.com/t/what-are-your-plans-for-a-table/95)._