# Why am I getting skipping line

**URL:** <https://forum.sienci.com/t/why-am-i-getting-skipping-line/4624>\
**Category:** 📄 General\
**Created:** [December 19, 2021, 2:45pm UTC](https://forum.sienci.com/t/why-am-i-getting-skipping-line/4624 "2021-12-19T14:45:44Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mofar](https://forum.sienci.com/letter_avatar_proxy/v4/letter/m/a88e57/32.png) [@Mofar](https://forum.sienci.com/u/Mofar)\
**Post date:** [December 19, 2021, 2:45pm UTC](https://forum.sienci.com/t/why-am-i-getting-skipping-line/4624/1 "2021-12-19T14:45:44Z")

</div>

I wondered if someone can tell me why I get skipping line in front of my M30

---

<div class="post-metadata">

**Author:** ![Heyward43](https://forum.sienci.com/user_avatar/forum.sienci.com/heyward43/32/369_2.png) [@Heyward43](https://forum.sienci.com/u/Heyward43)\
**Post date:** [December 19, 2021, 3:45pm UTC](https://forum.sienci.com/t/why-am-i-getting-skipping-line/4624/2 "2021-12-19T15:45:45Z")

</div>

@Mofar - First welcome to the group Maurice. We need a little more information in order to help you. Is this on the LongMill? Design software? Gcode software? Toolpath issue? Pictures would help. Any and all information to further describe you problem.

---

<div class="post-metadata">

**Author:** ![Mofar](https://forum.sienci.com/letter_avatar_proxy/v4/letter/m/a88e57/32.png) [@Mofar](https://forum.sienci.com/u/Mofar)\
**Post date:** [December 19, 2021, 4:00pm UTC](https://forum.sienci.com/t/why-am-i-getting-skipping-line/4624/3 "2021-12-19T16:00:38Z")

</div>

I have a Gemnitsu 4030 prover, I’m using carveco maker,and UGS.