# X-axis traveling too far mid cut MK2.5 48x30

**URL:** <https://forum.sienci.com/t/x-axis-traveling-too-far-mid-cut-mk2-5-48x30/13120>\
**Category:** ❓ Something's Up\
**Created:** [July 18, 2024, 2:28pm UTC](https://forum.sienci.com/t/x-axis-traveling-too-far-mid-cut-mk2-5-48x30/13120 "2024-07-18T14:28:51Z")\
**Posts on this page:** 1\
**Showing post:** 9

<div class="post-metadata">

**Author:** ![Mickus](https://forum.sienci.com/letter_avatar_proxy/v4/letter/m/f0a364/32.png) [@Mickus](https://forum.sienci.com/u/Mickus)\
**Post date:** [July 19, 2024, 11:21am UTC](https://forum.sienci.com/t/x-axis-traveling-too-far-mid-cut-mk2-5-48x30/13120/9 "2024-07-19T11:21:16Z")

</div>

Are you using SLB? If so look at speeds, acceleration settings and try motors always energised.

---

_[View the full topic](https://forum.sienci.com/t/x-axis-traveling-too-far-mid-cut-mk2-5-48x30/13120)._