# XY zeroing off after using touch plate

**URL:** <https://forum.sienci.com/t/xy-zeroing-off-after-using-touch-plate/21476>\
**Category:** ❓ Something's Up\
**Created:** [August 11, 2025, 12:39pm UTC](https://forum.sienci.com/t/xy-zeroing-off-after-using-touch-plate/21476 "2025-08-11T12:39:57Z")\
**Posts on this page:** 1\
**Showing post:** 2

<div class="post-metadata">

**Author:** ![Spamming\_Eddie](https://forum.sienci.com/user_avatar/forum.sienci.com/spamming_eddie/32/7296_2.png) [@Spamming\_Eddie](https://forum.sienci.com/u/Spamming_Eddie)\
**Post date:** [August 11, 2025, 1:16pm UTC](https://forum.sienci.com/t/xy-zeroing-off-after-using-touch-plate/21476/2 "2025-08-11T13:16:30Z")

</div>

Hi Belz,

Has your issue in this here topic been resolved or might it be that it has something to do with it?

> [@Y axis off 3.5mm after Roughing Pass](https://forum.sienci.com/t/y-axis-off-3-5mm-after-roughing-pass/21362):
>
> Due to issues with my machine I have recently upgraded my mk1 30x30 from a LB to the SLB. I have also replaced all my V-wheels and added auto backlash adjusters. My machine is calibrated and squared but after I run my roughing pass on Gsender when the machine returns to XY 0 it is off about 3.5mm on the Y axis for some reason. Now when I adjusted my y axis back to the original work zero that I had marked it was still way off the roughing pass. Please Help!

---

_[View the full topic](https://forum.sienci.com/t/xy-zeroing-off-after-using-touch-plate/21476)._