3D Printed Leveling Feet

[_Michael]

I made some leveling feet for my table. It’s been awhile and they haven’t broken yet so I thought I’d share.

They are sized to bolt onto a 2x4 with 1/4 20 nuts and bolts. I used PETG with a 0.6mm nozzle. 4 walls, 6 top and bottom, 0.3 layer height and 25% infill.

This zip file has a single 3mf in it.
leveling_feet.zip (392.4 KB)

My legs are made from two 2x4’s fastened in an L shape. These fit nicely in that shape.

[ozguzzi]

Thank you Michael, just what I needed for my LongMill MK1. I moved a 1,000 miles and had to make a new table for it.

[qsligh]

Thanks Mike, haven’t received my unit, but I’m sure they’ll come in handy when it arrives!