Inspired by the twist-in style cable organizers by Sienci, this will twist into the Sienci T-Tracks.
There are 3mm slots on the top. I use it to hold vertical acrylic sheets which function as chip guards when cutting aluminum to try and keep the mess down.
You’ll need supports if you want to print this in the strongest orientation, support interface material is great stuff.
TwistTrack.stl (66.7 KB)
Awesome thanks………………………
Thanks for sharing this any chance you can mod it into the twist in cable holders like came with the machine I’d like some more to help with my cable management and haven’t found the stl yet
@gremlin go to sienci’s website and click on the resources tab. Select Altmill. On the left side of that screen scroll down to the hand book section and select Open Source. Then select the link for I assume Altmill mk 2 for you? Then after the page loads, at the bottom of the screen there are tabs. Select the hardware tab. Then select the Misc tab. Then select the Altmill 3DP Cable Hanger tab and export/download it in the file format you want.
Awesome thanks I have it now I could not find that when I looked through that file before
do you have any pictures of it in use?
