Usual preface, Iām with PreciseBits. So while I try to only post general information take everything I say with the understanding that I have a bias.
Not sure you are talking about the same bit. But if itās the long 1.75" length of cut one I went through some of it with a āgeneric geometryā here:
Not seeing a 1/32" tapered tool in their store. To even take a guess would need to know more like flute count, taper, material, etc. However, one universal thing is that if you are using it for 3d carving with a 8-10% stepover. You can go a pretty fast as the chip thinning means you are actually cutting MUCH less than you think. As an example 50IPM on a 2 flute running at 10KRPM is a 0.0025" chipload (what really matters). However, if you are cutting that with a 8% stepover you would only really be cutting a 0.00136" chipload. Meaning in order to cut the 0.0025" you would need to actually cut at 1.84x or 92IPM.
Hope thatās useful. Let me know if thereās something I can help with.