I’m trying to cut a grid on my spoilboard and after I set X0Y0 and run outline, the MK2.5 goes the full machine area, not the 29x31 spoilboard area. Also, the cut speed is 45ipm, not the speed set in gcode. Appreciate all the advice .
I’m trying to cut a grid on my spoilboard and after I set X0Y0 and run outline, the MK2.5 goes the full machine area, not the 29x31 spoilboard area. Also, the cut speed is 45ipm, not the speed set in gcode. Appreciate all the advice .