I am trying to mount the SC card in the SLB controller and it refuses to work. I have run out of ideas and hope someone will have a suggestion/s I can try. So far I have:- the only card available locally is a 32g sandisk. It has been formatted FAT32 and would not work. I deleted the partition and f…

It appears the issue I am having relates to the Tools>SD card manager (v1.6.1) Whenever I do anything in the tool it throws the 60 error and shuts down the SLB. I find if I avoid the tool and only use the console it then reads the card and shows all the contained macros. Not sure about stability yet…

Thanks Eddie, I have read that post. Not to sure what is meant regarding versions. As far as i can find out there is only one firmware version that supports SD, which is the one I downloaded off the Sienci site. Turned out I had the card mentioned as causing problems so I bought a different brand bu…

If you’re running 5.0.5b you will not see .macro files with the default $F listing since that extension was added to the whitelist later. You should see .gcode files. If you type $F+ you’ll see it listed. sienciHAL (5.0.5B) filetypes: Plugin_SD_card/sdcard.c at d00dc7beb5562539ff1dac2171492377cc…

As far as I know I have flashed with the correct firmware. The file I downloaded was SLB_5.0.5b_NGC.hex. At the end of the flashing process it shows Successful. $i shows BOARD:superlongboard-B.05.5b, but I can’t find any reference to know if that is correct. I will try a simple .gcode and see if …

SD card mounting issue

Community Support 🛠️ Assembly

Spamming_Eddie May 15, 2026, 6:33am 2

Hi Neville,

There is a known error with the SD card. I only remembered a post late co Chris made about it so without furter adue I am linking that post now.

Hope at least this clarifies things.