Hi Tim,
I did a forum search and found a post from @_Michael that refered to fox alien config page for all their machines. Is this what you are looking for?
Hi My apologies
Fox Alien CL -4x4
Supplied Fox Alien controller on USB direct port on laptop
Hp Elite G8 5 core 8Gb ram Win11
Runs fine with UGCS to-date no issues
Only just installed Gsender
Issue only appears when jogging.
D
https://foxalien.gorgias.help/en-US/default-grbl-settings-492871
The vasto machines are listed here with a downloadable zip file.
The same legendary michael posted a solution in a topic about using gsender without a cnc connected. That might be something you could look into, for practise sake?
Hello @Colinp , welcome the group Colin!
I have a spare Arduino, that I flashed with GRBL for this purpose. I mainly use it to answer questions about gSender from my design computer which is not connected to my CNC.
So if you have an Arduino you can flash it with GRBL and connect to it with gSender. You can then jog around, load tool paths and run them etc. without being connected to a CNC. Some things will not work like homing because there is nothing connected to the Arduino to provide signal…
1 Like