Vertical storing options

[Brayvin]

What are your plans for a table?

[20191230_201905] [20191124_224820] Getting there

What are your plans for a table?

Space limitations have prevented me from acquiring a CNC in the past. My shop is in one half of a two car garage because my boss insists on parking her car on her half. I managed to claim the ‘air rights’ and decided to mount my longmill on a platform that I could hoist out of the way when not in use. I bought a Racor 4’x4’ ceiling lift with a 250 lb capacity on Amazon for around $250 US. It works great. When lowered, I clamp it to the MFT top on my workbench to keep it from swinging around. …

What are your plans for a table?

Here’s a mobile unit based on a Rockler “Material Mate” https://www.rockler.com/rockler-material-mate-panel-cart-and-shop-stand [IMG_20201004_085239] [IMG_20201004_084815] [IMG_20200927_092733] [IMG_20201004_085139] [IMG_20201004_085517]

What are your plans for a table?

Due to a small shop I built my table to tilt, only sticks out about 2’ when tilted. I am planning an external monitor mounted on a tilt/ swivel mount to keep the dust off the laptop. [11] [20210117_132852] [31] [41] [51] [61] [71] [81]

What are your plans for a table?

[Table_Vertical]

What are your plans for a table?

I am currently using this table that I designed and built while waiting for my Longmill to arrive; however, I found that I rarely stowed it vertically and it virtually eliminates the pass-through option for doing projects longer than the machine. Also am looking to upgrade my X axis to 48, so I am designing a new one. However, this design has served me very well to start off with. Personally, I have done a lot of research into tables for the CNC and I have found that everyone has different…