📄 General

Topic	Replies	Views	Activity
About the 📄 General category	0	454	August 25, 2021
Acceptable file types In going back and forth with other members, some times I and others here offered to look at their CAM file or gcode file to see if we can spot the problem. The exchange can take place through open posts on the forum or t…	34	2208	August 26, 2022
TLS If using spoilboard as z-zer0	1	43	August 16, 2026
Upgrading from a Shapeoko 3	4	88	August 14, 2026
GControl Alternative	1	64	August 13, 2026
Auto-zero touch plate and homing	17	203	August 12, 2026
Auto Z probe Is there a way to slow down the movements	13	223	August 12, 2026
Carbide3d Spindle in Altmill	0	37	August 10, 2026
Extension to warranty	1	59	August 7, 2026
Enclosure Inquiry	0	39	August 4, 2026
GControl Flickering	6	58	August 3, 2026
TLS not setting z height correctly	12	271	August 2, 2026
Tool Length Sensor vs. AutoZero Touch Plate	11	367	August 2, 2026
Tool Length Sensor Availability	14	385	July 28, 2026
Alarm 17 while surfacing	2	84	July 26, 2026
Need help troubleshoot	3	54	July 23, 2026
ATC setup tips and tricks?	7	177	July 17, 2026
Gsender downsizing projects	1	60	July 16, 2026
Guitar Z-axis: LongMill MK3 30x30 vs AltMill 2x4	5	81	July 15, 2026
Longmill 3.0 and SLB EXT	4	89	July 12, 2026
Another theory on Z runaway	17	289	July 12, 2026
Atc failed at third project	9	186	July 11, 2026
Spindles in Europe	7	70	July 10, 2026
Spoilboard mounting	14	253	July 9, 2026
Picture to gcode for custom foam cases	6	100	July 9, 2026
PSA: Check your homing sensors	9	179	July 8, 2026
Shipping table for ATC?	5	108	July 8, 2026
How long did it take to get your CNC?	1	55	July 5, 2026
Introduction to CNC	2	74	June 30, 2026
Tilt Table Question	6	148	June 29, 2026

About the 📄 General category

0

454

August 25, 2021

Acceptable file types

In going back and forth with other members, some times I and others here offered to look at their CAM file or gcode file to see if we can spot the problem. The exchange can take place through open posts on the forum or t…